球迷网

最新公告:
當前位置:首頁-新聞動態>>公司公告>>不干膠材料是如何制造出來的你知道嗎?

不干膠材料是如何制造出來的你知道嗎?

來源:http://tjanamera.com/ 日期:2019-10-28 發布人:admin   不干膠材料制造的主要工序是涂布、復合,其它為輔助工序,依據生產廠家的條件和產品的特性采用不同類型的涂布設備。總體來說涂布機有兩品種型,一種為分體式,一種為串聯式。分體式是涂硅和涂膠復合在同一機器上兩次完成,或在各自的機器上完成;串聯式涂布為各工序在一臺機器上一次完成。
  The main process of self-adhesive material manufacturing is coating and compounding. Other processes are auxiliary processes. Different types of coating equipment are used according to the conditions of the manufacturer and the characteristics of the products. Generally speaking, there are two types of coater, one is split type, the other is series type. Split type is to apply silicon and glue on the same machine twice, or on their own machines; series coating is to complete each process on a machine once.
  a.經涂塑或有壓光層的底紙在設備A上涂布硅油,或者是先背印然后涂硅,涂硅后的底紙經烘箱枯燥或固化。經涂硅枯燥后的底紙復卷成卷,完成底紙加工工序。
不干膠防偽標簽印刷制作
  A. the base paper coated with plastic or calendered layer shall be coated with silicone oil on equipment a, or it shall be printed on the back first and then coated with silicon, and the base paper coated with silicon shall be dried or solidified in the oven. After being coated with silicon, the base paper is rewound into a roll to complete the base paper processing process.
  b.涂膠和復合工序在設備B上完成。設備的一端安放底紙,另一端安放面紙。工藝流程為:一端底紙涂膠并經烘箱烘干,抵達復合工位;另一端為面紙經張力控制、導向糾偏安裝后也抵達復合工位。在復合工位上底紙、面紙復兼并復卷成大卷。到此,完成不干膠材料制造的全部過程。
  B. glue application and compound process shall be completed on equipment B. The bottom paper is placed at one end of the device, and the surface paper is placed at the other end. The process flow is as follows: one end of the bottom paper is coated with glue and dried in the oven, and then it reaches the composite station; the other end is the surface paper, after the tension control and guide deviation correction installation, it also reaches the composite station. In the composite station, the bottom paper and the surface paper are combined and rewound into a large volume. To this end, complete the whole process of self-adhesive material manufacturing.
  不干膠
  Non drying adhesive
  a.一端底紙放卷后首先涂硅、烘干,然后進入背印和涂膠工位,經涂膠后的底紙進入烘箱烘干,抵達復合工位。
  A. after one end of the backing paper is unwinded, it is first coated with silicon and dried, and then it enters the back printing and gluing station. After gluing, the backing paper enters the oven for drying, and finally reaches the compounding station.
  b.另一端面紙放卷后首先經涂底層工位,經烘干后的底紙抵達電暈處置工位(用于薄膜材料,紙類材料可不用),電暈處置后的面料抵達復合工位。在復合工位底紙、面紙復兼并卷成大卷,完成不干膠材料的制造過程。
  B. after unwinding the other end of the face paper, it first passes through the bottom coating station, and the dried bottom paper arrives at the corona disposal station (for film materials, paper materials can not be used), and the fabric after corona disposal arrives at the composite station. In the composite station, the bottom paper and the surface paper are combined and rolled into a large volume to complete the manufacturing process of the adhesive material.
  以上是不干膠防偽標簽印刷制作的相關內容介紹,想要了解更多內容,歡迎訪問網站:http://tjanamera.comThe above is the introduction of the production of self-adhesive anti-counterfeiting label printing. For more information, please visit the website: http://tjanamera.com

上一篇:透明不干膠標簽印刷廠家告訴您危險廢物標簽怎么制作?
下一篇:在沒有品味過紅酒的狀況下,紅酒不干膠標簽來幫助!
聯系我們
上海天天彩选4 黑龙江快乐十分 甘肃11选5 黑龙江快乐十分 河南11选5 河南11选5 湖南快乐十分 甘肃11选5